Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Last questions:
Yes, the Lokbox mechanism is used to fasten the bottom of the drawer to the front part without preventing adjustment of it. It is compatible with the Concept, Slim and Vantage-Q drawers or any drawer. It is especially recommended for very wide drawers used in the furnishings of kitchens, bathrooms, lounges and even inside wardrobes. However, you need to take into account that the installation dimensions change. See diagram.
Yes, it can be combined with a wide range of our undermount recycling buckets. Please refer to the table below for compatibility:
The RAL of the white finish of the siphon guard is approximately 9003. The RAL code for the grey finish of the siphon guard is approximately 7045. The RAL code for the anthracite grey finish of the siphon guard is approximately 7043.
If it is mounted in the option with mechanised door, the distance is 10mm.
The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043. The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.
Concept 30 kg exterior drawer height 105 mm
Concept 30 kg exterior drawer height 185 mm
Concept 30 kg exterior drawer height 138 mm
Concept 50 kg exterior drawer height 138 mm
Concept metal sides height 105 mm RIGHT
Concept metal sides height 105 mm LEFT
Concept metal sides height 138 mm RIGHT
Concept metal sides height 138 mm LEFT
This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.
This light has a range of 400 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
