Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Accessories for wardrobe
The gap between the side of the module and the frame / guides of the Keeper interior cabinet or dresser accessories is 25mm.
The gap between the side of the module and the frame / rails of the Hack interior cabinet or walk-in closet accessories is a minimum of 20mm.
We would like to remind you that in the case of folding-door or hinged-door assembly, the hanger must go with the lateral supplement.
The following video shows how you can easily assemble the pull out lateral shoe rack.
The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.
According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.
Yes, the Self trouser holder stands out for its ease of installation and because it can change sides easily. In order to change the position of the trouser holder it is only necessary to unscrew the central body and separate it from the runners in order to change side, and unscrew the cylindrical handle and put it on the other side.This trouser rail incorporates 37 mm full-extension ball bearing runners with a gentle sliding movement and a handle for pulling out of the furniture. Also, it has eleven chrome steel bars with non-slip rubbers for hanging trousers on.
Yes, it is only necessary to cut the cross profiles of the Keeper frame with a straight cut. In this manner you can attain an inside width of the unit less than 555 mm.Afterwards, it will be necessary to bear in mind the new measurement of the frame in order to add the different accessories such as baskets, drawers and trouser racks.
The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.
The following video shows how you can easily assemble the extractable shoe rack Moka.
Yes, the Moka trouser holder is available in two models, for assembly on either the right hand side or left hand side of the wardrobe, and to that end there are different codes. This completes the range of furnishing and storage options for your wardrobe or dressing room.
The following video shows how you can easily assemble the pull out lateral shoe rack Moka.
Yes, this mirror has 45 mm guides with bearings and a trigger for detaching it.It also has free rotation up to 180º so you can position it comfortably.It is easy and quick to install, without mechanisms, simply by screwing it into the unit. To make it even easier, it comes with the screws required for assembly.
The Moka mirror is assembled on the side of a unit and needs a minimum width of 225 mm in order for the mirror to be extractable and rotating.
The following video shows how you can easily assemble the pull-out mirror Moka.
The following video shows how you can easily assemble the pull-out hanging rail Moka.
The following video shows how you can easily assemble the lateral pull-out tie rack Moka.
The side supplement of the Hang fold-down hanger is used to increase the distance between the hanger and the side of the unit, avoiding the arms of the hinges. Thanks to this supplement, you will be able to mount the Hang hanger fully integrated into your wardrobe with hinged doors.
The following video shows how you can easily assemble the Hang Moka wardrobe lifts.
Yes, you simply need to respect the minimum installation depth of the Moka runners and carry out the assembly with the clips that are supplied.
The gap between the side of the module and the frame / rails of the Moka closet or dressing room interior accessories is 9mm.
The following video shows how you can easily assemble the Moka accessories.
The following video shows how you can easily assemble the Sling wardrobe lifts.
According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.
Silk wardrobe rail central support
Silk wardrobe rail angular support
Wardrobe rail lateral support 90168
Direct assembly wardrobe rail lateral support
Wardrobe rail lateral support 40070
Wardrobe rail lateral support 60474
Wardrobe rail lateral support 71468
Wardrobe rail lateral support 60026
Silk wardrobe rail support set
Wardrobe rail central support 81203
Luxe wardrobe rail central support
Luxe wardrobe rail support set
Luxe wardrobe rail angular support
Luxe wardrobe rail support set, plastic
Steel wardrobe rail
Aluminium wardrobe rail
Luxe rectangular wardrobe rail kit
Silk wardrobe rail kit
Luxe rectangular rail for Zero structure
Wardrobe hanging rail kit 30x15 mm steel
Wardrobe hanging rail kit 30x15 mm aluminium
Wardrobe hanging rail kit Silk
Wardrobe rail lateral support 70143
The following video shows how you can easily assemble the Luxe supports.
The following video shows how you can easily assemble the Luxe supports.
The following video shows how you can easily assemble the Luxe supports.
