Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Slim drawer
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.
The minimum unit depth required to install a Slim interior drawer with push is calculated with the formula: Min. depth = Depth + 12 mm. In this case the minimum unit depth needed will be 500 + 12 = 512 mm.
The minimum unit depth required to install a Slim exterior drawer with push is calculated with the formula: Minimum depth = Depth + 3 mm. In this case the minimum unit depth needed will be 500 + 3 = 503 mm.
Yes, the bottom and the back of the Slim drawer have the same measurements for both the soft closing runners and the push runners.
The square rail section of the Slim drawer measures 23 mm by 13 mm and the section with trim measures 25 mm by 15 mm.
The RAL code of the anthracite grey finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 7043.The RAL code of the white finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 9003. Although it is necessary to bear in mind that the white silk colour of said drawer is metallized and the RAL codes are for flat colours.
The following video shows how you can easily assemble the Slim drawer.
Yes, the spacers that are user for assembling kitchen Vertex, Concept and Vantage drawers are the same as hinges on unit doors (hinged doors).
