Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Passage doors
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
No, with this system it is important to respect the door's maximum and minimum dimensions, as well as the relationship between its width, height and weight.
The following video shows how the sliding door system for wardrobes is assembled.
Carriage sets are selected depending on the door weight.Two weight ranges, one for doors up to 40kg and one for doors from 40kg to 80kg, are available for soft-close systems.
The following video shows how the sliding door system for wardrobes is assembled.
Yes, you should always mount the adhesive felt on the actuator of the Soft Neco soft close door when the adjustable Neco sliding door system is used. In the un-adjustable system, it is not necessary to use it.
An adhesive felt is supplied with the Soft Neco soft closing system, it should be mounted on the actuator of the door, unless you have a handle that is in that zone.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
For the assembly of Adige handle profiles for 18 mm board along with the Space + sliding doors, it is necessary to choose an outside runner with a thickness of 23 mm.
The upper reinforced runner acts as a thread for the runners on the Space+ sliding door system. This profile offers greater resistance to torsion than the runner that is not reinforced, therefore it is ideal for large wardrobes with heavy doors that weigh up to 85 kg each.
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
In order to mount the sliders on doors it is possible to use different screw options, always bearing in mind the board thickness of the door: - Euro screws. In this case it is necessary to machine a 5mm diameter hole into the door. For example, for a door thickness of 19 mm we will choose the code. 5044007 with a length of 17 mm. - Self-tapping screws. They can have a 4mm diameter which do not require machining on the board. For example, for a board of 19 mm we will choose a 4 x 20 mm screw with the code. 8218605 or 5032405.
The following video shows how the sliding door system for wardrobes is assembled.
