Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Accessories for kitchen furniture
The following video shows how you can easily install the ironing board.
The following video shows how you can easily install the ironing board.
This container or dustbin needs a 270 mm free space inside the kitchen module or unit.
In order to assemble the plastic base for the fridge, such as the Fridge Base, it is necessary to have the kitchen Bone feet as well as the number 10 metric screw thread (M10) from the same family, as the base as four holes for fastening the feet.The Fridge Base is also perforated for ventilation and designed for fridges to be integrated into 600 mm wide units with tufts for assembly.
Yes, it's very easy. Simply use a ruler and cutter to trim the sink protector to the size you want.Run the cutter along the line several times, then bend along the cut and you can cut the aluminium panel.
We have protectors designed for assembly in kitchen floor units and in sink floor units.They are produced using natural textured aluminium with a plastic strip around the border that protects the unit from small leaks or from cleaning products.These protections are sized for 16 mm and 18 mm board, for special measurements consult the conditions.
We have an anti-slip mat that is supplied in rolls that are easy to cut to any inside measurement of the drawer. This mat has two roles:It prevents objects moving inside the drawer when it is opened or closed.It prevents the bottom of the drawer being damaged with a graze or little knock when handling objects stored in the drawer.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.
The RAL code of the white finish of the Optima cutlery holder is approximately 9003. The RAL code of the grey finish of the Optima cutlery holder is approximately 7001. The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.
Sut blinds can be adapted to different heights with a maximum height of 1500 mm. To do that, you simple need to cut the side rails and not fully unroll the blind. You need to bear in mind that the minimum gap for housing the blind box is 175 mm. However, the width of the Sut blind cannot be modified or cut, as this affects the pulling in mechanism of the blind.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The distance between the rods of the dish draining rack is 18 mm.Each of the rods is 7 mm wide.
The following video shows how you can easily assemble the Inox plate racks.
