Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Drivers and detectors
The connection for this type of 230V AC sensor with this converter is very straightforward, it does not require tools or electrical know-how. The quick connection including both the cable and the converter should be simply used.
The following video shows how you can easily install the aforementioned the Vertikal Flat 60 multiconnector.
The following video shows how you can easily install the aforementioned the Vertikal Push 100 multiconnector.
The following video shows how you can easily install the aforementioned the Vertikal Push 60 multiconnector.
We have a KIT with cod. 5205020 that allows you to transform the AMP connections to Miniled in order to use it with this converter.
The Wirly sensor must be connected after the converter because it is a sensor that works at 12V DC or 24V DC.
One Wi-Fi module can be linked to 20 LED controllers.
One remote control can be linked to 20 LED controllers.
One LED controller can be connected to 10 Wi-Fi modules.
One LED controller can be connected to 10 remote controls.
Yes, just press the MATCH button on each controller and the 1,2,3 or 4 buttons on the controller to link it.
Yes, you only need to press the MATCH button on the controller and the ON/OFF button on each remote to link it.
The following video shows how you can easily install the RGB control with the LED light controller.
The following video shows how you can easily install the CCT control with the LED light controller.
The following video shows how you can easily install the monochrome control with the LED light controller.
In order to assemble a switch easily you need to adhere to the following diagram:
In order to charge two Smartphones, it is necessary to use the Plugy with the 15 W converted (code 7001420), while in order to charge two Tablets it is necessary to connect the 30 W converter (code 7001320).
The USB Plugy connector is designed to charge Tablets and Smartphones in a discreet and accessible way thanks to its complete integration into the furniture.
The following video shows how you can easily install the USB Plugy connector.
The Vertikal multiconnector can be opened upwards as well as downwards. It is designed to be built-into high units as well as low units thanks to its easily extractable retractile design and manual hiding.Its innovative design makes it possible to complete integrate into kitchen, office and home furniture, in low units with the opening upwards and in high modules with it downwards.
The USB connectors on the Vertikal multiconnector are solely for charging 5V DC - 2.10A (2x1.05A) electronic devices.
The following video shows how you can easily install the aforementioned the Vertikal multiconnector.
The following video shows how you can easily install the aforementioned the Atom 26 multiconnector.
The following video shows how you can easily install the aforementioned the Atom 14 multiconnector.
The following video shows how you can easily install the aforementioned the Qi wireless charger and USB Airtop.
Our LED converters do not have the necessary characteristics to work together with dimmers in the primary voltage (110 ~ 240V AC, 50 ~ 60Hz).However, we do have devices that can regulate the intensity (dimmer) in the secondary voltage (12V-24V DC). These can be:\- Lynx switch/dimmer (cod. 5203620). \- Spirit switch/dimmer (cod. 5022617). \- Micron switch/dimmer (cod. 5053125). \- Dot switch/dimmer (cod. 50228).
