Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
LED lights
This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.
This light has a range of 400 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
Yes, it is possible to recharge the Kaus light with a mobile phone charger. The charger needs to have a type C micro USB and should at least supply 5V DC 1A.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily install the Hercules mirror with built-ib lighting.
The following video shows how you can easily install the Cassiopea backlit bathroom mirror.
The following video shows how you can easily install the Pegasus illuminating bathroom mirror.
This light has a range of 360 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2.5 hours.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 to 2.5 hrs.
Yes, it is possible to recharge the Kraz light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC.
The following video shows how you can easily install the aforementioned LED lighting.
Persei lighting is available in two different lengths of 395 mm and 595 mm, both in cool white or warm white colour temperatures. Cutting or tampering may result in the lighting not working.
Cygnus lighting is available in two different lengths of 195 mm and 395 mm, both in cool white or warm white colour temperatures. Cutting or tampering may result in the lighting not working.
The following video shows how you can easily install the aforementioned LED lighting.
Yes, the Kuma light requires a more powerful converter as it has USB ports for recharging smartphones and tablets. If you wish to use those USB ports in order to recharge devices, the light's consumption will be greater.It is thus recommended to use at least a 30W converter, code. 7001320 for the use of a single light and a 50W converter code. 5008420 for the use of 2 lights.
Yes, the Crater light can be recharged with a mobile phone charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.The charging time will vary in accordance with the amperage of the charger, although it is recommended to use 5VDC 1A chargers, therefore the estimated charge time is 2 to 2.5 hours.
The following video shows how you can easily install the aforementioned LED lighting.
The battery has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
The battery of the Castor light is recharged with a mobile charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.This battery is located on the side support with a cover, which must be taken off in order to recharge it.Likewise, it has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
The Castor battery-powered light has a range of 700 lighting cycles per charge before the batteries run out.
Yes, we recommend fully charging the battery of the Castor luminaire before installation.Although some batteries may be partially charged upon arrival, the charge will be minimal and simply for testing purposes. Therefore, a fully charged battery should be used for installation.
The following video shows how you can easily install the aforementioned LED lighting.
Yes, the Auriga Switch luminaire has a proximity sensor that acts as a switch, with the added bonus that it can connect up three other luminaires to be controlled by the same sensor.A total of 4 Auriga luminaires can be installed (1 Auriga Switch luminaire and 3 Auriga luminaires without a sensor).To this end, it features an input and an output cable, as well as an AMP connector. Moreover, it includes a soft light start and end function that creates an attractive, innovative effect.
