Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Gola Profiles
The following video shows how you can easily assemble the Gola profile for ovens.
Household appliances that can be integrated are completely compatible with the Gola profile system (with or without bumper). Thanks to that compatibility, household appliances remain hidden, thus adding a sense of continuity to kitchen furniture.In order to facilitate the work of manufacturers and assemblers, it is only necessary to bear in mind that the sum of the height along with the base, needs to be greater than the height of the household appliance along with the upper Gola profile that is used. Also, the attached document shows details with practical examples.
The Gola system joining accessories are created using plastic (grey or white finish), and also, the accessories that are positioned on corners or corner edges require the profile to have a mitre joint.On the contrary, the straight cut accessories are created from matt silver anodized aluminium, and also, with all of them the profile only needs a straight cut, therefore preparation is easier.
In order to install a Gola horizontal profile system in aluminium, it is necessary to use type A or B joining supports. These supports do not have handles and they make it easy to anchor or move the horizontal profiles simply and comfortably. Their pressure mounting or direct screwing requires machining of Ø10 mm in the side of the furniture.The difference between them is the distance between the edge of the machining to the centre of the drill hole. For the A support, it is 15 mm and for B it is 19.7 mm, both are valid for fastening the upper profile as well as the central profile.Depending on the distance of the machining that you want. you can choose one support or the other.
In order to install the Gola profiles on a unit it is recommended to have gap measurements for being able to open the drawer or the door. These measurements are for guidance purposes and may vary depending on the overlaps.For an upper Gola profile it is recommended to have a 37 mm gap, and for a central Gola profile a 40 mm gap is recommended. The image shows a vertical view of the side of the unit.
The following video shows how you can easily assemble the profile system Gola.
Upper Gola profile for kitchen furniture
Central Gola profile for kitchen furniture
Short support A for kitchen furniture
Long support B for kitchen furniture
Bracket for Gola profile
Angle bracket with expansion screw Gola
Upper profile accessories for kitchen furniture
Central profile accessories for kitchen furniture
Gola angle upper profile for kitchen furniture
Gola cover upper profile for kitchen furniture
Gola cover central profile for kitchen furniture
The RAL code of the white finish of the profiles system Gola is approximately 9003.The RAL code of the anthracite grey finish of the the profiles system Gola is approximately 7043.The RAL code of the black finish is approximately 9011.
