Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Slides
The following video shows how to assemble the keyboard holder runners.
The RAL code of the white finish of the rails for T30 drawers is approximately 9001. The RAL code of the black finish of the rails for T30 drawers is approximately 9005. The RAL code of the grey finish of the rails for T30 drawers is approximately 9022
The following video shows how you can easily assemble a drawer with soft- closing and T30 drop runners.
The adjustment of the hidden runners for Slippe drawers without a hook is achieved by turning the washer on the front fastening pivot, which is screwed for that purpose.
It is enough to use a single locking pin in order to fasten a drawer to the hidden Slippe rails. For assembly, you only require a small hole in the side of the drawer rack as indication in the catalogue´s machining diagrams. In this manner the drawer can be assembled and disassembled as many times as you want.
There is a blocking pin that is designed in order to be able to fasten the drawers to the hidden Slippe rails simply and affordably, thus avoiding them from falling during transport or handling. There are also two different models, one for total extraction rails and another longer model for partial extraction rails.With this pivot, you avoid the use of additional screws, and in order to assemble it you only need a small hole in the side wall of the drawer. In this manner the drawer can be assembled and disassembled as many times as you want.
The difference between the hidden Slippe rails with a hook as opposed to those that do not have a hook, is the possibility of disassembling the drawer with a simple click.
No, this runner has different drawer mechanisms, as well as a different length.
The locking pivots that are mounted on the Silver guide rails are designed in order to easily fasten the drawers to the guide rails, thus preventing them from falling during transportation or handling.These pivots avoid the use of additional screws and for their assembly you only need a small hole in the side of the drawer. In this manner the drawer can be assembled and disassembled as many times as you wish.
Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver partial pull-out slides with push to open function and the Silver soft-close partial pull-out slides on the same drawer.However, they are not compatible with the Slippe partial pull-out slides with push to open function.
Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver total pull-out slides with push to open function and the Silver soft-close total pull-out slides on the same drawer.However, they are not compatible with the Slippe total pull-out slides with push to open function.
No, the drawer length is 10 mm longer in the case of the Silver rail. Also, the position of the adjustment and locking pivot is different.
No, the drawer measures are different between.
Yes, the drawer measures are the same in the Silver and Slippe with partial and/or total extension with clips.
The following video shows how to adjust runners for Silver drawer.
The following video shows how to assemble runners for Silver drawer.
